
The first parts booklet to include the EB-2 bass was produced in January of 1965. At this point the EB-2 had just been reissued, after a break in production between 1961-63 (see EB-2 timeline). The list suggests the original 1958-60 machine heads, rather than the Kluson 538 keys fitted beyond that time, though these are listed for the EB-0 and EB-3. Likewise, the handrest (HR-655CH) is listed for these solid bodies but not the EB-2 - though a few months after this list was published (probably June 1965), it and the underbridge mute were fitted as standard on all EB-2s.
1965 | ||
Bridge | BR-655N | Nickel |
Fingerboard | F-655 | Rosewood, pearloid dot inlay, unbound, 30 1/2" scale, 20 frets |
Fingerrest | FR-655N | Celluloid, comp. bl/w/bl |
Machine heads | MH-570-P | Sealfast, 12 to 1 ratio / plastic button |
Truss rod cover | TRC-20-N | Celluloid, black, white edge |
Pickup & control assembly (Complete) | CPA-655 | |
Control assembly (wiring harness) only | CA-655 | |
Front pickup | PU-601-N | nickel cover |
Coil only | PUC-601 | |
Cover only | UC-655N | |
Control pot - volume | CBA-811-1053 | |
Control pot - tone | CBA-811-1831 | |
Knob - volume | K-2G-2G V | Gold |
Knob - tone | K-2G-2G T | Gold |
Jack | J-11 | |
Switch | SW-1885 | |
Choke | GA-90C-1 | |
Cover plate (choke) | CA-655-5 |
By 1971, the EB2 had been deleted and sales of the EB2D were slipping. This parts list offers direct replacements for the majority of components, at least for 1960s instruments, and suitable equivalents for the oldest basses.
1971 | ||
Bridge | 80038 | Bar bridge assembly assembly |
Anchor | 10904 | |
Stud | 10447 | |
Hex screw | 10556 | |
Bridge | 80035 | Tune-O-matic assembly |
Anchor | 10904 | |
Stud | 10937 | |
Hex screw | 10556 | |
Saddle screw | 10561 | |
Delrin insert (saddle) | 10514 - treble side 10515 - bass side | |
Machine heads | 82536 14548 - treble side 14547 - bass side | Kluson 538, chrome - complete assembly |
Machine heads | 82534 14572 - treble side 14571 - bass side | Schaller M-4 - complete assembly |
Fingerrest (EB-2D) | 82027/12078 | Complete assembly/fingerrest only |
Fingerrest (EB-2) | 82028/12079 | Complete assembly/fingerrest only |
Short rod | 15601 | Mounting bracket |
Short foot | 15902 | |
Open nut | 15410 | |
Blind nut | 15408 | |
Handrest | 80037/19410 | Chrome - complete assembly/handrest only |
Pickup & control assembly (Complete, EB2) | 81014 | |
Control assembly (EB2) | 13761 | |
Pickup & control assembly (Complete, EB2D) | 81015 | |
Control assembly (EB2D) | 13780 | |
Front pickup assembly | 13517 | |
Cover only | 13912 | |
Back pickup assembly | 13533 | |
Choke | 19501 | |
Choke cover | 19303 | |
Control pot - EB2 volume or tone | 70027 | |
Control pot - EB-2D volume | 70027 | |
Control pot - EB-2D tone | 70021 | |
Knob - volume | 19230 | |
Knob - tone | 19229 | |
Dial pointers | 15758 | |
3/8-32 hex nut | 15401 | Nickel plated |
3/8" flat washer | 15755 | Nickel plated |
The final parts list to reference the EB2 and EB2D basses was published in 1977, by which time these models were long deleted. Many parts are no longer listed, and in some cases Gibson simply suggests contemporary equivalents.
1977 | ||
Machine heads | 82534 14572 - treble side 14571 - bass side | Schaller M-4 - complete assembly |
Handrest | 19410 | Chrome |
Control assembly (EB2) | 13761 | |
Control assembly (EB2D) | 13780 | |
Front pickup assembly | 13517 | |
Back pickup assembly | 13533 | |
Front pickup cover | 13912 | |
Choke | 19501 | |
Choke cover | 19303 | |
Control pot - EB2 volume or tone | 70027 | |
Control pot - EB-2D volume | 70027 | |
Control pot - EB-2D tone | 70021 | |
Knob - volume | 19230 | |
Knob - tone | 19229 | |
Dial pointers | 15758 | |
3/8-32 hex nut | 15401 | Nickel plated |
3/8" flat washer | 15755 | Nickel plated |
Gibson EB-2 bass guitars for sale
1968 Gibson EB2D Bass with Hard Shell Case
Glen Ellyn, Illinois, 601**, UNITED STATES OF AMERICA
$2200
That mudbucker in the neck is wooly! And the bridge has bite! The switches and knobs work as they should with a little scratchiness as you use them. Aside from that you won't notice it.
Comes with non original case
... more
1968 Gibson EB2D Bass with Hard Shell Case
Bridgeport, West Virginia, 263**, UNITED STATES OF AMERICA
$3700
1968 Gibson EB-2 Semi Hollow Short Scale Electric Bass w OCBC ~ 100% Original, VG+
Collingswood, New Jersey, 081**, UNITED STATES OF AMERICA
$6500
Music, Instruments Jewelry: Antique / Vintag??e MENSJEWELRY: CAMEOSJewelry: 1940-1980's VintageJewelry: 1910 - 1939 Art DecoJewelry: 1837-1910 VictorianJewelry: 1895-1910 Art NouveauJEWELRY: Necklaces, Pendants WATCHES & WATCH ACCESSORIES JEWELRY: Brooches & PinsJEWELRY: EarringsJEWELRY: BraceletsJEWELRY: LocketsJEWELRY: Charms & BraceletsJEWELRY: SetsJEWELRY: RingsJEWELRY: SILVERCHINA & PORCELAINRELIGIOUS ... more
1958 Gibson EB-2 Thinline Bass Guitar
Keene, New Hampshire, 034**, UNITED STATES OF AMERICA
$7500
... more
1965 Gibson EB-2 Bass a very special ordered EB-2 in a factory Argentine Gray !
Fort Lauderdale, Florida, 333**, UNITED STATES OF AMERICA
$8995
guitare bass Epiphone Rivoli VC année inconnu 1960? défrettés bass acoustics ty
Apremont, 85***, FRANCE
€590
Je répondrais au mieux à vos questions je ne suis pas musicien merci... more
Gibson 1964 EB-2 Used Electric Bass Good Condition
Widnes, WA8***, UNITED KINGDOM
£3457
Epiphone Rivoli EBV232 Vintage 1963 Semi-Acoustic Bass Kalamazoo(Gibson) '63+OHC
Milano, 20***, ITALY
€3500
Suono notevole, vero vintage sound!!
Custodia rigida originale compresa
Vendita tra privati con formula AS / IS senza alcun diritto di ... more
1964 Epiphone Rivoli Bass in Cherry Sunburst
London, SW6***, UNITED KINGDOM
£3800
1964 EPIPHONE RIVOLI - CHERRY SUNBURST
A Gibson EB2 in all but name, headstock and inlays this semi hollow bodied Rivoli has a laminated maple top and solid maple centre block. The pickup is the famous EB pickup also used on the Gibson EB series. Feature the Baritone switch this has that sound these basses are renowned for. The tortoiseshell Pickguard is, as usual with these missing its silver E badge. ... more
Vintage Gibson 1966 EB-2 Hollowbody Bass Guitar with Sunburst Finish
Winnipeg, Manitoba, R3B***, CANADA
C $3850
Vintage original 1966 Gibson EB-2 Hollowbody Bass in original Sunburst finish.
The tone is thick and warm.
All original, except for a missing metal thumb rest.
The finish does showcase some checking, and the original case is intact but worn.
... more
Gibson EB-2 1967 Sunburst Bass 335 Semi Hollow
Bari, 70***, ITALY
€4900
RARE 1968 Gibson EB-2 Bass Guitar In Sparkling Burgundy Metallic WITH HARDCASE
Newcastle upon Tyne, NE12***, UNITED KINGDOM
£6500
In a very rare factory-original Sparkling Burgundy Metallic finish. These finishes were done at the factory back in the day over the top of sunburst finishes if there were any imperfections, so these are pretty hard to find - especially in such great condition!
The finish does show signs of use and the usual checking / patina, as is to be expected of an ... more
1959 Gibson EB 2 . Bass guitar with original brown hard shell case
London, SW6***, UNITED KINGDOM
£11700
1959 Gibson EB 2 . Bass with original brown case This has to be one of the finest examples we have ever had of this Gibson EB2 in natural finish One of only sixty made in natural body finish Double bound maple body. Mah gany neck with a r sewood fingerboard and dot inlays. The bass comes with the original black plastic pickup and Banjo style tuners. Two of the tuner tips do look different to the other two. One side is ... more