This website uses cookies to personalise content and adverts, to provide social media features, and to analyse traffic. When you buy through links on our site we may earn an affiliate commission. See terms and conditions
A Gibson EB3 bass from the peak year of their production, built at Gibson's main plant in Kalamazoo, Michigan, USA; one of the last basses produced whilst Gibson was still under the ownership of CMI.
The 1960s EB3 was very popular with the British bands of the time. Jack Bruce, bass player with Cream had a very distinctive style which was closely associated with the short scale EB3s he played. The sixties instrument was characterised by its one piece mahogany body and neck, and comparatively small body (only slightly larger than a same-period SG guitar) and of course its sound. Peak production was from 1969-1971; around about 2000 guitars shipped each of those years. It was a still popular instrument in the early seventies (examine a 1972 Gibson EB-3) but sales fell rapidly during 1973-4.
Neck: One-piece mahogany set neck. Rosewood fingerboard
Frets: 20
Width at nut: 38mm ≈ 1.5"
Weight: 3.7kg
Gibson had been using the tune-o-matic two-point bridge on all EB basses for a year or so; early examples still had the more centrally located hand rest, but they were quickly replaced by the chrome bridge cover, as shown here. The late 60s EB basses had thinner necks than the early 60s basses; this one is 1 1/2" at the nut, compared to 1 3/4" of some of the earliest EB3s.
The components and their positions give a clear indication that this is a late 1960s bass. The most obvious sign is the two point bridge with bridge cover, but also the close-spaced controls and the taller narrower cover to the EB humbucker. Note the wooden thumbrest over the scratchplate. These had been fitted to EB3 basses since their inception, but this was the final year - by the time of the remodelling in late 1969 to the slotted headstock EB basses, this was gone (see a slotted headstock EB3.)
Reverse body detail - showing heel and control access cavity.
Gibson EB humbucker pickup. The cover is chrome-plated, as opposed to the nickel of the mid sixties basses. This version of this classic pickup is still very primitively mounted for the time, but just the next year, Gibson would upgrade the EB bass series and include a surround for this pickup, allowing height adjustment. Have a look at a 1971 Gibson EB3 here.
There is a volume and tone control for each pickup; the two controls on the left for the neck pickup, and the two on the right for the bridge. The varitone control acts as a pickup selector, aswell as applying the choke in position 1. The settings are: Position 1: neck pickup with tone choke Position 2: bridge pickup only Position 3: both pickups Position 4: neck pickup. Listen to some soundclips of this bass.
The bridge pickup on an EB3 is very different tonally to the neck pickup - many players find the neck a little too boomy, and the bridge a little too thin, preferring a blend of both pickups.
EB mini-humbucker pickup and tune-o-matic two-point bridge, but this time without the cover. One problem with this Gibson bridge is that any strings with significant silk windings tend to have intonation problems caused by the silk extending over the saddles. This can be a real problem, and is best solved by buying short scale strings with no silk at the ball end (I like Labella Deep talkin'). Cutting back the silk does work to some extent, but is by no means the best solution.
The heel (neck-body joint) of 1969 solid body EB basses is quite distinctive; it is rounded, and sits flush with the body itself. Earlier and later EBs were noticeably different - see the EB bass heel page for some different Gibson bass heel designs.
The 1969 EB3 had an inlaid Gibson logo with centered crown inlay. This headstock has been refinished, slightly imperfectly - the crown inlay is a block of pearl with details edges painted in black. Compare this to a 1969 EBO to see how it should look. Note that the Gibson logo at this period has no dot over the letter i.
This image clearly shows the one-piece neck of this bass, and solid headstock. Sixties EBs were never built with a volute - an extra thickness of wood behind the weak neck/headstock joint area, though these became standard from 1972. Compare with a later period EB3.
The clips below demonstrate this bass in all four varitone positions, both with direct input and through a vintage B15 amp. The choked setting (varitone position 1) is perhaps a bit too strong when amplified - the intense vibrations can rattle apart old amps, and certainly cause undesirable vibrations when digging in. When DI'd, though, the depth and roundness of tone is captured beautifully. Other settings work really well when amped.
DI only
The clips below were played on this 1969 EB3, with fingers rather than a pick. Recorded directly into an M-audio mobile pre soundcard - no amplifier.
Varitone position 1 - neck pickup with tone choke
tone turned to 0 - for the full dub experience
Varitone position 2 - bridge pickup only
Varitone position 3 - both pickups
Varitone position 4 - neck pickup only
Ampeg B15
These clips were recorded using a Shure SM58 microphone in front of a 1964 Ampeg B15 amp, with neutral settings (volume, bass and treble all on 5/10).
Varitone position 1 - neck pickup with tone choke
Varitone position 2 - bridge pickup only
Varitone position 3 - both pickups
Varitone position 4 - neck pickup only
* Gibson EB basses had subtly different cutouts small changes in the bevels as opposed to the actual size of the horns - there is no obvious way to name these differences, and no reference to them in any Gibson literature, so they have been described here simply as types 1-5. For a comparative look at the variations, see the EB bass cutaway page
Gibson EB-3 bass guitars for sale
Flyguitars.com is funded by its visitors. When you buy through links on our site we may earn an affiliate commission. For more info see terms and conditions.
Fort Lauderdale, Florida, 333**, UNITED STATES OF AMERICA
$11495
This is a beautiful 1st year produced example of the exactly ??Cream Era?? Gibson EB-3 bass, pretty much identical the primary one used extensively by Jack Bruce from 1966 into the mid-70s. These expensive double pickup EB basses were made in fairly small quantities from 1961 into the mid-1960s but most examples that surface now are the later ??60s and early ??70s models, when they were produced in much greater numbers ?? at least partially due to the popularity of Cream ! Those are fine ... more
Glastonbury, Connecticut, 060**, UNITED STATES OF AMERICA
$3700
One owner, bought new in 1969 from Quigly Music in Kansas City with original Gibson Case. One small strap rub on back with minor finish scratches on back as seen in photos.... more
The 1972 Gibson EB-3 The first Model Mahogany Bass Guitar is a vintage electric bass guitar that exudes classic style and timeless appeal. With a short scale body made of mahogany with a maple neck and a right-handed design, this 4-string bass guitar features a rosewood fretboard for a smooth and rich tone. This model, part of the Gibson series, comes with a hard case for added protection and easy transport. Whether you're a seasoned musician or a beginner looking to add a vintage touch to your ... more
El Segundo, California, 902**, UNITED STATES OF AMERICA
$3500
Beautiful stunning EB three Gibson guitar Bass original case, one lady owner, left as found 1970s i??ll let the Pictures do the talking or the playing ! Enjoy laurence & sally of StorageWars and baggage battles currently www roundthebend tv ... more
Union, New Hampshire, 038**, UNITED STATES OF AMERICA
$1275
The Gibson 70s EB-3 WALNUT Used Electric Bass is a classic right-handed solid wood electric bass guitar with a 4-string configuration. This vintage model, known as the Les Paul, was made in the United States and features a solid brown body color, making it both visually appealing and high-quality in terms of sound and playability. With its durable construction and iconic design, this guitar is a popular choice among bass players looking for a reliable and timeless instrument.... more
Antioch, Tennessee, 370**, UNITED STATES OF AMERICA
$3199
Very good condition 1969 Gibson EB-3 bass in cherry. No breaks. All original outside of the changed tuners, replaced tone pot (original included), and a recent refret. This example has some honest play wear throughout from touring, but is lucky to come out with no breaks to report. Bridge mute assembly functions. Truss rod works well, neck is straight, and it has been recently restrung. 8 3 pounds. Gibson logo is a bit faded, but this is purely cosmetic of course. This example sounds very boomy,... more
Carbondale, Illinois, 629**, UNITED STATES OF AMERICA
$2190
Add Me to Your Favorite Sellers Olivia's Vintage would like to present this 1973 Gibson EB-3 in its original Walnut finish. It has a great playing neck with great frets. It's all original and 100% complete along with its original bridge cover and original purple lined hardshell case. It's in very good condition with some nicks + dings, light belt buckle wear on the back of the body and other cosmetic wear including one misaligned extra screw hole concealed by the bass side of the bridge ... more
Danville, Pennsylvania, 178**, UNITED STATES OF AMERICA
$1500
This vintage Gibson EB-3 (1969-1972) was used on stage in a touring band as a primary instrument between 1974 and 1982. There have been some customizations, pictured. Slotted headstock, mahogany body with walnut finish. Some costmetic dings consistent with age and use; the headstock crack was repaired professionally years ago. Overall in good condition, and was last used on a recording in 2023. Comes with original case, stencilled with the name of the band.... more
This is a Vintage Gibson EB 3 bass from circa 1972 in a lovely aged cherry red, the bass is all original with a very low easy to play action, it has a great sound with lots of options for multiple different tones with the 4 way switch 2 pickups and 2 volume and 2 tone controls. Everything works perfectly, there is no fret wear mainly because I always use flat wound strings. The colour has worn in one place on the neck, its at the back of the neck so is out of sight, [please see the photo] you ... more
GIBSON EB3 Vintage bass guitar. Not entirely standard condition but very playable, versatile guitar with wide range of sounds and in fine condition (mods are later 3 point bridge, modified tone circuit). Complete with shaped case and strap. PLEASE examine photographs carefully before bidding. Cheapest on offer' Further information or details with pleasure. Collection only, unless you are prepared to accept as is and at your risk entirely No foreign bids thankyou.... more
The Gibson EB-3 is a bass guitar introduced in 1961 and discontinued in 1979. It was produced at Gibson's plant in Kalamazoo, MI It features a slim SG-style body, a short 30 5" scale, and two pick up's (a large humbucking pickup in the neck position and a mini humbucker pickup in the bridge position). The electronics include a four-way rotary pickup selector switch (for Series 1 basses: neck pickup with midrange notch, bridge, bridge and neck with low end rolled off neck pickup, neck pickup with... more
1971 GIBSON EB 3 SLOTTED HEADSTOCK BASS CASE - made in USA : * CASE ONLY ! * interior has stains * tolex has rips * all latches are working fine * worn but solid * check all pics PLENTY of PARTS for SALE ATTENTION! OVER 1000 more GUITARS-BASSES-AMPS-PARTS in our OTHER AUCTIONS !!! CHECK OUR SHOP OUT -------------->>>>>-------------->>>>> ... more
1971 GIBSON EB 3 SLOTTED HEADSTOCK BASS CASE - made in USA : * CASE ONLY ! * strap that holds case open=GONE * bottom and top are loose =need reglueing * tolex has rips * all latches are working fine * check all pics * SOLD AS IS - NO RETURNS... more
1971 GIBSON EB 3 SLOTTED HEADSTOCK BASS CASE - made in USA : * CASE ONLY ! * interior has stains * tolex has rips * all latches are working fine * worn but solid * check all pics ... more
Available now is this 1965 Gibson EB3. One of only 339 shipped in that year, and one of even fewer that made it this side of the pond The EB-3, widely known as the classic Cream bass, was used and made most famous by Jack Bruce from blues-rock pioneers 'Cream' around 1967 onwards. He had a few of them over that time period, but his main and most photographed instrument was a matching '65. The spacing between the control knobs was changed in 1965 to match the guitar line, so only a percentage... more
- Overall: Good condition. - Frets: Good condition, no issues. - Hardware: All original. - Electronics: All original, no issues. - Finish: This Bass Guitar is in Good condition with some wear through previous usage. There are some dents on the body as well as a crack near the jack input, which has been repaired. - Made in USA, 1961. * Hard Case included. * Please note all of our USED / EX-DISPLAY Guitars & Basses are checked, tested,... more